Release notes - Summa GoProduce


Summa GoProduce - Version 1.8

Released: 


Improvements

  • Added scaling option in % to import action.
  • Changed Y margin of cut-off from 25mm to 100mm.
  • Changed tooltip of overcut option.
  • "Duplicate method" button now gets disabled in Edit Material window when all methods are used.
  • "Remove method" button now gets disabled in Edit Material window when only one method is present.
  • "Remove material thickness" button now gets disabled in Edit Material window when there is only one thickness present.
  • A new method is now automatically added when creating a new material.
  • A new thickness is now automatically added when creating a new material.
  • New regmark camera profiles have the same default settings as the "Default" camera profile.
  • Subwindows are opened with a size that fits on the screen.
  • A created RIP xml now also contains methods created by the user.
  • It is now possible to import a collection of action sets in an XML file.
  • Rom rev 31 is now required for communicating with the F series.
  • Added "Reset Origin" option to "Set working zone" action.

New Features

  • Import of AutoCAD DXF files (versions 12, 13, 14, 2000, 2004, 2007, 2010, 2013 (AutoCAD 2013-2017), 2018).
  • Korean translations are now available.
  • Added a new material "Squid" to the Material Manager.

Fixed Issues

  • Solved: GoProduce could crash after detecting all registration marks, especially with backside cutting.
  • Solved: PDF UserUnits option was not supported.
  • Solved: In some cases the tool was in down position when moving to the first shape of a layer.
  • Solved: After reading a barcode, no error message was shown when the barcode file was not found.
  • Solved: GoProduce crashes when importing a file with no data.
  • Changed sample PDF file to meet the SDK.
  • Solved: Backside cutting with router doesn't work with marks and inserts that have the same diameter.
  • Solved: Regmark method didn't get translated.

Recommended Firmware

F Series Firmware MD9974

Download

Summa GoProduce v1.8


Summa GoProduce - Version 1.7.21

Released: 


New Features

  • Italian translations are available.
  • German translations are available.
  • Spanish translations are available.
  • Chinese translations are available.
  • French translations available.
  • Segment connector between segments. (selectable per tool)
  • Cut-off between jobs, the tool assigned to the thru-cut method will be used (the one in the design or the default tool for thru cut for the selected material)
  • Cross marks added to the type of registration marks that can be used.
  • Updated Material Manager - new materials + new bits (V-groove, compression bit).
  • Revision number in the title bar.
  • Add X and Y as labels to the ruler to indicate machine origin.
  • "Remove layer" action added.

Improvements

  • "Reduce nodes" added to "Clean-up design" action set
  • "Close objects" improved when cutting rectangle rasters.
  • "Search regmarks" removes registration marks on top of each other.
  • Improved error messages
  • Send material thickness to the machine before cutting, so that the up-position of the installed tools is automatically set high enough - new firmware needed.
  • Disable "duplicating objects" for jobs with registration marks.
  • Automatically restart camera communication if communication fails due to interference during segmented jobs.
  • The activation key can be filled in manually.
  • For the dealer version, do not ask for a serial number of the machine during installation.
  • Version number added to the material manager, action setlist, camera profiles list, this to allow an update of new materials, new action sets, new camera profiles
  • Auto-detection of space between copies when "copy distance" is set to 0. The distance between copiers must be between 20 and 200 mm. If copy distance is non-zero, then a 20 mm margin is allowed on the specified value.
  • Maximum value of 500 mm for space between copies.
  • Option to turn off Tooltips.
  • Remove "Feed Fixed Length".
  • Combine layers with the same name when importing a file (needed for GMG Printfactory)

Fixed Issues

  • Solved: Compensation for objects outside of registration marks was sometimes not correct.
  • Solved: Bottom Buttons were not visible when job had too many layers.
  • Solved: Routing lines were sometimes missing with "keep inner shape" or "hatch fill"
  • Solved: "Job doesn't fit on the table" when trying to output a single vertical line
  • Solved: Wrong mark prediction in the first segment of the second job with "On end of job" set to "feed job length" with multiple copies.
  • Solved: Wrong prediction of marks in tandem mode.
  • Solved: "Fixed size" compensation not working correctly when the job contains single lines.

Summa GoProduce - Version 1.6

Released: 


Improvements

  • Log fatal errors under GoProduce folder in My Documents.
  • Round imperial units to 3 decimals when exporting material manager to PDF.
  • Button to reset to factory defaults for action sets.
  • Disable "Transform" on the selection tab for print and cut jobs.
  • Set rotational speed for "Polished Finish" to 48.000 rpm instead of 25.000 rpm.
  • Use "Keep inner shape" as default for Bevel-Cut methods.
  • Add a fixed country list instead of allowing to type the country in a text field when registering a new customer.
  • New camera profile for backside cutting for thick materials.

Fixed Issues

  • Barcode import does not search for SGP files.
  • Overcut elimination for HT RM is wrong, it uses the routine like for the single edge tool.
  • While cutting the registration marks for backside cutting, marks can be completely misshaped with long diagonal lines.
  • Hatch lines can mess up original shape when coinciding with the edge of the outer routing path.
  • Space occupied by bit no longer visible after undo.
  • Regmark method displayed as Regmar k in the ribbon.
  • Flute direction and offset do not work.
  • Multipass for heavy duty does not work.
  • The position of registration marks is not always correctly predicted in segments after the first one.

New Features

  • Add a sample file.